Band Heaters

Home | Band Heater Hub

Duraband Mica Insulated Band Heaters

Main Page | Constructions Styles | Electrical Terminations | Clamping Options | Standard Sizes and Ratings | How to Order

Duraband Heaters are available in one-piece, two-piece and E X P A N D A B L E construction.

Two-piece construction uses a Built-In Hinge to keep both halves together making handling and installation easier. Recommended for large diameter cylinders or when one-piece units cannot be slipped into place.

Duraband with the E X P A N D A B L E design feature allows for the heater to be opened once for installation over the barrel without causing internal damage to the windings.

The Duraband clamping mechanism is a unique design consisting of a low thermal expansion BUILT-IN STRAP providing greater clamping action than separate straps or bent-up flanges (ears).

Minimum Inside Diameter:
3/4 in. (19.0mm)
Minimum Width:
5/8 in. (15.9 mm)
Maximum Temperature:
Standard Sheath:
900ºF (482ºC)
Stainless Steel Sheath:
1200ºF (649ºC)

 

Stock NHL Mica Insulated Nozzle Heater
  • Type NHL with 12" leads and 2" of protective sleeving
  • Supplied with low profile clamping strap
  • View Stock List
 b204t.gif (10813 bytes)

 

Stock NHW Mica Insulated Nozzle Heater
  • Type NHW with 12" leads and 10" SS wire braid
  • Supplied with low profile clamping strap
  • View Stock List
 b205t.gif (10669 bytes)

 

Stock and Standard (Non-Stock) OEM Replacement
Mica Insulated Nozzle Band Heaters for Hot Tip Bushings
  • All heaters have 24" high temperature leads with 22" stainless steel overbraid.
  • View Stock List

B206.gif (4113 bytes)

 

Stock and Standard (Non-Stock) Mica Insulated Barrel Band Heaters with Leads (Type W3)
  • Type W3—Single Wire Braid Leads
  • Designed as one-piece expandable type enables you to open up the heaters to the diameter of the barrel for easy installation.
  • Type NE—Built-In-Strap (Heaters less than 1-1/2" wide have separate straps—Type SE)
  • View Stock List
 b209te.gif (11624 bytes)

 

Stock and Standard (Non-Stock) Mica Insulated Barrel Band Heaters with Leads (Type L2)
  • Type L2—Lead Wires on One Side
  • Designed as one-piece expandable type enables you to open up the heaters to the diameter of the barrel for easy installation.
  • Type NE—Built-In-Strap (Heaters less than 1-1/2" wide have separate straps—Type SE)
  • View Stock List
 B213.gif (12292 bytes)

 

Stock and Standard (Non-Stock) Mica Insulated Barrel Band Heaters with Leads (Type W1)
  • Type W1 —Straight Wire Braid Lead
  • Designed as one-piece expandable type enables you to open up the heaters to the diameter of the barrel for easy installation.
  • Type NE—Built-In-Strap (Heaters less than 1-1/2" wide have separate straps—Type SE)
  • View Stock List
 b211t.gif (9157 bytes)

 

 

Stock and Standard (Non-Stock) Mica Insulated Barrel Band Heaters with Screw Terminals

  • 10-32 Screw Terminals
  • Larger heaters (dia. 2-1/2" or greater) are designed as one-piece expandable type enabling you to open up the heater to the diameter of the barrel for easy installation.
  • Type NE—Built-In-Strap (Heaters less than 1-1/2" wide have separate straps—Type SE)
  • View Stock List
 B215.gif (12205 bytes)