Low_Density_D

Home | Back to Cartridge Heater Selector | Back

Standard 3/8" Diameter Low Density Cartridge Heaters – Actual .372" (9.45 mm)

Consult Tempco for quantity discounts.

Sheath Length		Watts	Watt Density		Part Number		Price US Dollars
in	(mm)	Watts	W/sq.in.	W/sq.cm.	120V	240V	Price US Dollars
1-1/2	38.1	15	13	2	LDC00033	—	$19.95
1-1/2	38.1	40	34	5.3	LDC00034	—	$19.95
2	50.8	50	28	4.4	LDC00035	—	$20.80
2-1/2	63.5	75	32	4.9	LDC00036	—	$22.30
2-1/2	63.5	100	42	6.6	LDC00037	—	$22.30
3	76.2	100	34	5.3	LDC00038	—	$23.55
3 -1/2	88.9	120	34	5.3	LDC00039	LDC00040	$25.75
4	101.6	75	18	2.8	LDC00041	LDC00042	$26.25
4	101.6	130	32	4.9	LDC00043	LDC00044	$26.25
4	101.6	150	36	5.6	LDC00045	LDC00046	$26.25
4	101.6	180	44	6.8	LDC00047	LDC00048	$26.25
4-1/2	114.3	75	16	2.5	LDC00049	LDC00050	$28.85
4-1/2	114.3	150	32	4.9	LDC00051	LDC00052	$28.85
5	127.0	150	28	4.4	LDC00053	LDC00054	$30.45
5	127.0	200	38	5.8	LDC00055	LDC00056	$30.45
5 -1/2	139.7	200	34	5.3	LDC00057	LDC00058	$31.80
6	152.4	225	35	5.4	LDC00059	LDC00060	$32.85
6	152.4	250	39	6	LDC00061	LDC00062	$32.85
7	177.8	200	26	4	LDC00063	LDC00064	$36.70
7	177.8	265	35	5.4	LDC00065	LDC00066	$36.70
8	203.2	300	34	5.3	LDC00067	LDC00068	$39.25
9	228.6	350	35	5.4	LDC00069	LDC00070	$43.45
9-1/2	241.3	300	28	4.4	LDC00071	LDC00072	$44.65
10	254.0	375	34	5.2	LDC00073	LDC00074	$45.90
12	304.8	425	31	4.9	LDC00075	LDC00076	$51.65
12	304.8	450	33	5.1	LDC00077	LDC00078	$51.65
12	304.8	475	35	5.4	LDC00079	LDC00080	$51.65
12	304.8	500	37	5.7	LDC00081	LDC00082	$51.65
14	355.6	500	31	4.9	LDC00083	LDC00084	$59.85
16	406.4	550	30	4.7	LDC00085	LDC00086	$68.05
20	508.0	200	9	1.3	LDC00087	LDC00088	$84.45
20	508.0	650	28	4.4	LDC00089	LDC00090	$84.45
22	558.8	800	32	4.9	—	LDC00091	$92.65
24	609.6	750	27	4.2	—	LDC00092	$100.85

How To Order

Standard Heaters

Custom Engineered/Manufactured Heaters

Order by Catalog Part Number from the Standard Sizes and Ratings List above. Note that Part Numbers shown are for heaters with Type F Termination (10" leads).

Understanding that an electric heater can be very application specific for sizes not listed TEMPCO will design and manufacture a Low Density Cartridge Heater to meet your requirements. Standard lead time is 3 weeks.

Please contact Tempco for further assistance.

Toll Free (888) 268-6396

Credit.gif (10916 bytes)