TempcoHead1A.gif (3001 bytes)
Home | Back to Air Cooled Selector

Standard Sizes and Ratings
Extruder Size 1" to 1-1/2"

I.D.
in		 O.D.
in		 Width
in		 Watts Volts Phase Cooling
Tube O.D.		 Features Part
Number

Each Half
2.875 5 7.5 1100 240 1 n/a Bolt Clamp, 3/4"dia. hole at top of gap CBH03796
2.875 5 4.125 500 240 1 n/a Bolt Clamp, 1/2"dia. hole at top of gap CBH03853
2.875 5 7.5 1300 240 1 n/a Bronze, bolt clamp CBH04506
2.875 5 8.5 1500 230 1 3/8 Bolt clamp CBH03840
2.875 5 11.5 800 240 1 n/a EP Terminal box CBH02335
2.875 7 7.5 1500 230 1 n/a Bronze CBH04619
2.875 7 8.5 1500 230 1 n/a Bolt clamp CBH03151
2.875 7.875 6 1125 240 1 3/8 CBH03257
3 7 4.5 1000 240 1 n/a 3/4"dia. Hole top/bot. gap CBH04736
3.25 5.25 4.375 1000 240 1 n/a CBH04150
3.5 7 4.5 850 240 1 n/a Bronze CBH04194
3.5 7 7 1000 230 1 n/a Heat only, 1"dia. hole on 1 half only CBH02072
3.5 7 10 1500 230 1 n/a Bronze, 1"dia. hole E/H CBH02875
3.5 8 5.5 700 220 1 n/a Bolt clamp CBH04678
3.625 6.75 4 675 190 1 n/a Bronze, Type F leads CBH03149
3.625 6.75 5.5 375 110 1 n/a Type F leads, 1"dia. T/C hole top/bot. at gap CBH02483
3.625 6.75 5.5 550 210 1 n/a Type F leads, 1"dia. T/C hole top/bot. at gap CBH02792
3.625 6.75 7.5 675 240 1 n/a 2"dia. Hole at top and bottom gap, Type F leads CBH02224
3.625 6.75 7.5 850 240 1 n/a Bronze, w/2"dia. vent hole, Type F leads CBH02040
3.625 6.75 7.5 1500 240 1 n/a Bronze, w/2"dia. vent hole, Type F leads CBH04858

Items in red are in Stock

 

Feature Abbreviations
E/H = Each Half C/T = Cooling tubes
CWW = Dual Set of Cooling Tubes CW = Single Set of Cooling Tubes
EP = Explosion Resistant Terminal Housing  MR = Moisture Resistant Terminal Housing
MPR = Moisture Proof Die Cast Aluminum Box RC = Non-Exposed Cooling Tubes/Recessed NPT Fittings