Tempco Logo

TEMPCO Electric Heater Corporation
Cast-In Heaters


Home | Back to Air Cooled Selector

Standard Sizes and Ratings
Extruder Size 2" to 2-1/2"

I.D.
in		 O.D.
in		 Width
in		 Watts Volts Phase Cooling
Tube O.D.		 Features Part
Number

Each Half
4 8 10.75 2000 230 1 n/a (1) 3/4"dia. hole in center at gap, 21/2"dia. * 3 hole CBH03254
4 8 10.75 3000 230 1 n/a Bronze CBH04719
4 9 5.375 1000 240 1 3/8 (1) 3/4"dia. Hole in center at gap CBH03256
4.25 7.5 13.00 2910 230 3 n/a (1) 1" dia.  hole CBH08563
4.375 8.25 12.25 2000 230 1 n/a (2) 1/8" NPT TC holes CBH01139
4.375 8.375 4.5 710 230 1 n/a (2) 1/8" NPT holes CBH01671
4.375 9.875 12.25 2000 230 1 1/2 2" Lg. slot at gap top/bot. CBH02189
4.5 8 11 2000 240 1 n/a (1) 11/4"dia. Hole E/H CBH01558
4.5 8.5 12 2750 240 1 n/a Bolt clamp CBH06640
4.5 9 11.5 2000 230 1 n/a 3/4" * 3" slot CBH05533
4.75 7.688 7.313 1250 460 1 n/a (2) 13/16" dia. holes on 1 half only CBH01625
5 8 16.25 3500 190 1 n/a Bolt clamp, (1) 3/4"dia. hole at top and bottom gap CBH03671
5 8 16.25 3500 240 1 n/a Bolt clamp CBH04477
5 10 11.187 2500 230 1 n/a Bolt clamp CBH01787
5 10 11.187 2500 230 1 n/a Bolt clamp CBH03215
5 10.25 14 3300 230 1 n/a Bolt Clamp CBH03564
5.5 8.75 3.5 900 240 1 n/a CBH04418
5.5 9 9 1725 230 1 n/a CBH04193
5.5 9.5 5.25 1250 230 1 n/a 3/8" Radius, cutout at each end, both halves CBH01772
5.5 9.5 12.5 2800 240 1 n/a Bolt clamp CBH04982
5.5 10 11 2100 230 1 n/a CBH02803
5.5 10 14 3250 240 1 n/a 5/8"dia. Hole E/H CBH04964

Items in red are in Stock

 

Feature Abbreviations
E/H = Each Half C/T = Cooling tubes
CWW = Dual Set of Cooling Tubes CW = Single Set of Cooling Tubes
EP = Explosion Resistant Terminal Housing  MR = Moisture Resistant Terminal Housing
MPR = Moisture Proof Die Cast Aluminum Box RC = Non-Exposed Cooling Tubes/Recessed NPT Fittings