Cast-In Circulation Heaters

Home | Cast-In Hub


Additional Information in the PDF File


The CHX-100 circulation heater is a compact lightweight unit used for heating gases or liquids. The material being heated is pumped through the coiled seamless 316 SS tubing which has been cast into an aluminum body that acts as the heat exchanger. A replaceable

Hi-Density cartridge set into a hole bored into the aluminum is the heat source. The material being heated never comes into contact with the HD cartridge heater.

Standard Design Features

  • Seamless 316 SS Tubing for fluid flow

  • Replaceable 5/8" diameter Hi-Density

  • Cartridge Heater

  • Cast Aluminum heat exchanger body

  • Operating pressure up to 3000 PSI

  • Operating temperature up to 350F (177C)

  • NEMA 4/7 enclosure with standoff standard

 

Optional Design Features

  • Process Thermocouple

  • Overtemperature Thermocouple

  • High Limit Thermostat

 

   

The CHX-200 circulation heater is a compact lightweight unit used for heating gases or liquids. The material being heated is pumped through the coiled seamless 316 SS tubing which has been cast into an aluminum body that acts as the heat exchanger. A tubular heating element is the heat source. The material being heated never comes into contact with the heating element.

 

Standard Design Features

  • Seamless 316 SS Tubing for fluid flow

  • Cast-In Tubular Heatery

  • Cast Aluminum heat exchanger body

  • Operating pressure up to 3000 PSI

  • Operating temperature up to 392F (200C)

  • Type C2 (General Purpose) housing with standoff

Optional Design Features

  • Process Thermocouple

  • Overtemperature Thermocouple

  • Type MPR (Moisture Resistant) or Type EP (Explosion Resistant) Housings

 

   

The CHX-300 circulation heater is a compact lightweight unit used for heating gases or liquids. The material being heated is pumped through the coiled seamless 316 SS tubing which has been cast into an aluminum body that acts as the heat exchanger. A tubular heating element is the heat source. The material being heated never comes into contact with the heating element.

 

Standard Design Features

  • Seamless 316 SS Tubing for fluid flow

  • Cast-In Tubular Heatery

  • Cast Aluminum heat exchanger body

  • Operating pressure up to 3000 PSI

  • Operating temperature up to 392F (200C)

  • Type C2 (General Purpose) housing with standoff

Optional Design Features

  • Process Thermocouple

  • Overtemperature Thermocouple

  • Type MPR (Moisture Resistant) or Type EP (Explosion Resistant) Housings

 
 
 
Note: If you have a special application requiring a custom manufactured Cast-In Aluminum Circulation Heater or need assistance selecting one of our standard heaters, consult Tempco with your requirements. We offer complete engineering services and support, working with you every step of the way to ensure customer satisfaction. Typical Applications

Solvent heating (MEK, NMP, ACT, EKC, others)

Heating of Air, CO2, Nitrogen and similar gases

Heating of non-flammable gases

De-ionized water heating

Steam generation

Glycol heating

Heating ink in printing

Diesel and Fuel heating

Packaging sterilization

Analytical instrumentation

Food and beverage heating

Coating and Paint heating