Home | Back to Ordering Information
Home | Back
to Ordering Information
General Purpose Terminal Boxes
| Standard Box Type C2
|
Type C2 is an individual terminal box for protecting the terminals on each Cast-In Band Heater half. It is also used on many other Cast-In Heater designs with one set of heater terminals. The C2 box design requires a flat pad on half round castings or a flat surface on other casting designs for mounting. Made from heavy gauge rust resistant sheet metal. Cover is removable for easy access to terminals. The box has two 5/8" diameter knockouts opposite each other for standard 3/8" BX connectors. To simplify installation, Cast-In Heaters fitted with boxes can be factory pre-wired with high temperature lead wire, protected with armor cable. If either one of these options are required; specify terminal box type, lead wire and cable length. Satisfies NEMA 1 requirements.Standard C2 box size: L = 4", W = 2-1/2" H = 2"
|
| Quick-Disconnect High Temperature Cup
and Box Assembly Type P2
|
Quick-disconnect cup
assemblies provide the simplest and safest means for applying power to any type of Cast-In
Heater installation. The box extends over the screw terminals on both Cast-In Band Heater
halves. If prewired plugs are required, specify length of lead wire and cable.Rated 250V maximum, 15 Amp maximum Terminal Box Size varies with dimensions of casting. |
