TempcoHead1A.gif (3001 bytes)
Home | Back to Liquid Cooled Selector

Standard Sizes and Ratings
Extruder Size 10"

I.D.
in		 O.D.
in		 Width
in		 Watts Volts Phase Cooling
Tube O.D.		 Features Part
Number
Each Half
14.5 18 8 4350 230 1 1/2   CBH05506
15 18.625 8 5000 230 1 5/8 CWW - C/T CBH03388
15 19 15.375 9000 230 1 1/2 Bolt clamp, CWW - C/T CBH04367
15.5 19 10 6750 240 1 1/2 Self drain C/T CBH05655
15.5 19 19.5 13800 230 3 1/2 Self drain RC - C/T CBH05358
15.75 19.25 15 10000 277 1 3/8 CWW, C2 terminal box CBH02242
17.5 21 9.5 4500 240 1 1/2 CWW, RC - C/T CBH03183
18 20 11.5 3500 480 1 n/a R1 Termination, segment heater, 82° coverage CBH05002
19 22.5 18 15000 460 3 1/2 C7 Terminal box CBH04880
20.5 23 9 6000 240 1 n/a Heat only CBH03338
31 33.5 7.5 7500 500 1 n/a 120° segment heater CBH05712
36 40 4.5 3500 240 1 1/2 RC - C/T, C2 terminal box CBH04896

 

Feature Abbreviations
E/H = Each Half C/T = Cooling tubes
CWW = Dual Set of Cooling Tubes CW = Single Set of Cooling Tubes
EP = Explosion Resistant Terminal Housing  MR = Moisture Resistant Terminal Housing
MPR = Moisture Proof Die Cast Aluminum Box RC = Non-Exposed Cooling Tubes/Recessed NPT Fittings