Home | Back to Liquid Cooled Selector
Home | Back to
Liquid
Cooled Selector
How-To-Order
To process your order or quotation, please specify the following information.
Cast-In Band Heater Strap Clamping
|
Cast-In Band Heater Bolt Clamping
|
Variable Dimensions |
Inside Diameter "A"_______ Length "B"_______ Thickness "C"_______ "D"_______ |
| Material Specifications | Aluminum • Bronze • Brass |
| Electrical Specifications | Watts each half _______ Volts each half _______ Phase _______ |
| Clamping Style | • Straps • Bolt Clamp |
| Cooling Tube Sizes | • 1/4" O.D.
• SS, 3/8" O.D. SS •
1/2" O.D. SS •
Optional Incoloy® (1/2" only) • Dual Cooling Tubes |
| Cooling Tube Fittings | • Non-exposed 3/8" NPTF
• "HS" Hi-Seal Fitting
• "RA" 90° Copper Elbow • "FF" Flared Seal • Non-exposed 1/2" NPTF • "BF" High Pressure • "RT" 90° Threaded Elbow • "R3" Straight Threaded Click here for Cooling Tube Termination Specifications |
| Terminal Style | •
"S" Post Terminals •
"T" Post
Terminals • "T7" Post
Terminals • "C4" Ceramic Cover • "E" Right-Angle Lugs • "L"-"L9" Terminal Lug • "R" 90° Blockhead • "R2" Blockhead Click here for Screw Terminal Termination Specifications |
| •
"SF"-"SF9" Quick-Disconnect Click here for Quick-Disconnect Termination Specifications |
|
| •
"F" Plain Leads •
"R1" Armor Cable Leads Click here for Flexible Lead Specifications |
|
| •
"TS" Leads and Shrink Sleeve •
"H"
Hermetic Seal Click here for Moisture/Contamination Seal Specifications |
|
| Terminal Protection Box | • "C2" Standard
• "C7" 1 Box for both halves • "P2" High Temperature Quick-Disconnect Click here for General Purpose Terminal Box Protection Specifications |
|
• "EP" Explosion Resistant
• "MPR" Moisture Resistant Box • "MR1" Rigid Moisture Resistant Box Click here for Explosion and/or Moisture Proof Terminal Box Protection Specifications |
|
| Finish | Machined or As Cast. Indicate surfaces to be machined |
| Special Cast-In Features | Holes, Cutouts, Slots, Bevels, Mounting Studs, Stand-Offs and Taper Angles. For special features a detailed drawing is required. |
