Home | Back to Ordering Information
Home | Back
to Ordering Information
General Purpose Terminal Boxes
|
Terminal Protection Type C2
|
The box has two 5/8" diameter knockouts opposite each other for standard
3/8" BX connectors. The cover is removable, providing easy access to the screw
terminals for electrical wiring. To simplify installation, Cast-In Heaters fitted with boxes can be factory pre-wired with high temperature lead wire, protected with armor cable. If either one of these options are required; specify terminal box type, lead wire and cable length. Satisfies NEMA 1 requirements. |
| Quick-Disconnect High Temperature Cup
and Box Assembly Type P2
|
Quick-disconnect cup
assemblies provide the simplest and safest means for applying power to any type of Cast-In
Heater installation. The box extends over the screw terminals on both Cast-In Band Heater
halves. If prewired plugs are required, specify length of lead wire and cable.Rated 250V maximum, 15 Amp maximum Terminal Box Size varies with dimensions of casting. |
