Home | Back to Cast-In Heater Selector
Home | Back to
Cast-In Heater Selector
Platen Heaters
Platen Heater Standard Sizes and Ratings
Platen Heater Ordering Information
|
Type TE1
|
Type TE2
|
Type TE3
|
Type TE4
|
| Elements exiting through the thickness toward the ends of the width or length. | Elements exiting through the thickness toward the center of the width or length. | Elements exiting through the thickness and recesses to protect the screw terminal from mechanical damage. Can be located toward the end or center. | Elements exiting toward the ends of the width or length through the top surface. |
|
Type TE5
|
Type TE6
|
Type EP
|
Type P1
|
| Elements exiting at the end and toward the center of the width or length through the top surface. | Elements exiting toward the center of the length and width and through the top surface. | Explosion and/or moisture resistant box. | Quick-disconnect cup assembly female plug available upon request. |
|
Type C2
|
Type CT1
|
Type CT2
|
Type CT3
|
| Sheet metal terminal box with 5/8" knockouts. | Cooling tube exiting through the thickness toward the ends of the width or length. | Cooling tube exiting through the thickness opposite of each other toward the ends of the width or length. | Cooling tube exiting at the ends of the width or length through the top surface. |
