Tempco Logo

TEMPCO Electric Heater Corporation
Cast-In Heaters


Home | Back to Air Cooled Selector

Standard Sizes and Ratings
Extruder Size 6"

I.D.
in		 O.D.
in		 Width
in		 Watts Volts Phase Cooling
Tube O.D.		 Features Part
Number
Each Half
9.313 12.313 23 7500 230 3 n/a Bolt clamp, 1-1/8" dia. hole at gap CBH07492
9.313 12.313 28 7500 230 3 n/a Bolt clamp, 1-1/8" dia. hole at gap CBH07491
9.313 13.813 23.5 9900 230 1 n/a CBH05327
9.313 13.813 23.5 7500 460 3 n/a CBH05515
9.313 13.813 28.5 7500 460 3 n/a 1"dia. hole top gap CBH05514
9.313 13.813 28.5 9900 460 3 n/a 1"dia. hole top gap CBH05513
9.5 15 13.75 4000 230 1 1/2 Bolt clamp CBH02797
9.5 15 13.75 7250 230 1 1/2 Bolt clamp CBH02185
9.5 15 27.75 12000 230 3 n/a Bolt clamp, 1/8" NPT hole E/H CBH01666
9.75 14 19.438 6000 230 1 n/a 2" Lg. slot top gap CBH01262
9.75 14 23.875 6000 230 1 n/a 2" Lg. slot top/bot. gap CBH02945
9.758               CBH03984
9.875 13.875 8.5 3500 240 1 n/a Bolt clamp CBH06644
9.875 13.875 8.5 3750 240 1 n/a Bolt clamp CBH06645
10.000 13.25 12 6480 230 3 n/a   CBH08424
10.039 13.289 12.992 6000 230 3 n/a CBH04738

Items in red are in Stock

 

Feature Abbreviations
E/H = Each Half C/T = Cooling tubes
CWW = Dual Set of Cooling Tubes CW = Single Set of Cooling Tubes
EP = Explosion Resistant Terminal Housing  MR = Moisture Resistant Terminal Housing
MPR = Moisture Proof Die Cast Aluminum Box RC = Non-Exposed Cooling Tubes/Recessed NPT Fittings