High Emissivity Black Coating

Can be added to flat panel ceramic fiber heaters for use as pure infrared style heaters. 
Factory installation only

Consult Tempco with your requirements.

Rigidizer

The external surface of ceramic fiber heaters is treated with a chemical rigidizer to give the heater the hardened shell typical of this type of heater. When the ceramic heater is cut in the field prior to installation for any purpose, or repairs are required, rigidizer should be used to recoat the surface.

Part Number: CFR00010 :       Quantity: 1 Gal.

Ceramic Fiber Cement

The cement has many general purposes such as bonding ceramic fiber heaters together, or adding additional external insulation.

Part Number: CFR00020          Quantity: 1 Gal.

Ceramic Putty

Made from high purity "Asbestos Free" Aluminum Oxide based ceramics with a melting point in excess of 3200°F (1760°C) and formulated with special ceramic binders that, on drying, produce a strong ceramic body.

* Resistant to molten metals. most chemicals, oxidizing and reducing atmospheres.

* Use for instant repairs to brick, mortar, burner blocks, insulation furnace holders, thermocouples, etc.

* Applications include molding and bonding ceramic fiber components, high temp. insulation, insulation of pipes, supports, burners, turbines, etc

Size: 4 oz. Squeeze Tube Part Number: CFR00030         
Size: 11 oz. Caulking Tube Part Number: CFR00032  

Specifications
Melting Point........................................................3200°F (1760°C)
Continuous Service .............................................2300°F (1260°C)
Base Material ........................................................Al2O3
Density ...................................................................40-50#/Sq. ft.
Specific Heat ...........................................................0.25 BTU/# °F
Dielectric Constant at 108 cps...............................1.61
Dielectric Strength ..................................................100 Volts/mil.
Loss Factor ..............................................................0.017
Thermal Conductivity at 500°F (260°C)................ 065