TempcoHead1A.gif (3001 bytes)
Home | Back to Radiant Heater Selector | Back to Ceramic E-Mitter Selector

Infrared E-Mitter Structural Housing Systems

 

The housing and reflectors are very easy to assemble and arrange into radiant panels offering great flexibility in the construction of various types of infrared ovens.

Design Features
  • New housing design construction made of lightweight extruded aluminum.
  • 7/8" dia. through hole is cast in each end cap for standard 1/2" trade size wiring connectors allowing standard armor cable or conduit to be used for AC power input. 1/2" hole plug provided for one end.
  • Optional internal thermocouple available for individual heater or zone control.
  • Internal mounting hole pattern makes it convenient to mix and match E-Mitter® sizes and ratings, with or without thermocouples.
  • Space between reflector and housing wall offers a good thermal barrier to  protect the wiring area.
  • Designed for use with the full families of CRB, CRC and CRH Series B & C.
  • Can be used with any manufacturer’s standard 60 mm by 245 mm or 60 mm by 122 mm ceramic radiant elements.

 

Top View of Housing 

 

 The heater lead wires are insulated with ceramic beads and connected to ceramic terminal blocks. Wiring can easily be done for the heaters to work individually or in groups.

 

Housings for CRC, CRH C and CRB, CRH B Elements

Housing shown with CRK00007 Reflectors

Standard Housings — In Stock

Trade Length “A” “B” # of E-Mitters® Part Number
10" 10.13" (257 mm) 8.63" (219) mm 1 CRB or 2 CRC CRK00001
20" 20.00" (508 mm) 18.50" (470 mm) 2 CRB or 4 CRC CRK00002
30" 29.88" (759 mm) 28.38" (721 mm) 3 CRB or 6 CRC CRK00003
40" 39.75" (1010 mm) 38.25"(972 mm) 4 CRB or 8 CRC CRK00004
Made To Order In Lengths Up To 10 Ft. ( Holds up to 12 CRB E-Mitters)

 

 

Reflectors for CRC, CRH C and CRB, CRH B Elements

  • Specifically designed to withstand bending and heat distortion.
  • The reflectors are made from highly polished chrome steel  providing superb reflecting characteristics.
  • Will withstand high operating temperatures.
  • Available in two standard sizes; Includes standoffs and hardware.
  • Easy installation into ESH structural housing assemblies.
For CRC, CRH Series C (4.88"L by 3.71" W) Order Part Number CRK00006
For CRB, CRH Series B (9.81"L by 3.71" W) Order Part Number CRK00007