Cable Clamps

For 3/8" Diameter sheath or 1/4" armor cable
Cable Clamp
(Part Number TCA-107-102)-($)

For Lead wire with or without Braid
Cable Clamp
(Part Number TCA-107-101-($)
Neoprene Grommet
(Part Number TCA-109-102)-($)

Compression Type Tube Adaptors
· Can be used with TEMPCO-PAK or
· Tubing Both types have Brass Ferrules

Standard Tube Adaptors
Affords higher degree of stability to Plug or Jack

Insert Tube Adaptor
Secured by slots in body of the Plug or Jack (2-Pin or 3-Pin)

Neoprene Boots for Standard Plug and Jack

· Made of Flexible Neoprene
·  Sized to cover standard connectors even with accessories (such as Cable Clamps and Tube Adaptors)
· 3/32" Wire Entrance
· Order 2 per Assembly
· For 2-Pin Connections only
(Part Number TCA-121-101)-($)

Dual Tube Adaptors

· Assemble Standard Connectors into Dual Connectors
· For adjacent TEMPCO-PAK
· Has Brass Ferrule
· Use 2-Pin Connectors only

Dual Cable Clamps

· Assemble Standard Connectors into Dual Connectors
· Accommodate either One or Two Lead-In Cables
· Use 2-Pin Connectors only
(Part Number: TCA-107-103)-($)

Cable Clamps and Grommets

· For 2-Pin Miniatures only
Cable Clamp 
(Part Number TCA-107-105)
Neoprene Grommet 
(Part Number TCA-109-102)

Mini Insert Tube Adaptor

· Secured by slots in body of the Plug or Jack (2-pin or 3-Pin)
· Compression Fitting has Brass Ferrules
· Can be used with TEMPCO-PAK or Tubing
· For all Miniature Connectors only

Neoprene Boot for Miniature Plug and Jack

· Made of Flexible Neoprene
· Sized to cover miniature connectors even with accessories (such as Cable Clamps and Tube Adaptors)
· 3/32" Wire Entrance
· Order 2 per Assembly
· For 2-Pin Connections only
(Part Number: TCA-121-102)-($)

Neoprene Wire Entrance Grommets,
Nylon Wire Protection Washers

Grommets used in place of Cable Clamp.
(Part Number TCA-109-103)-($)
Washer protects fine wire from breakage.
(Part Number TCA-120-101)-($)

Brass Crimping Inserts

Used Primarily with TEMPCO-PAK

Brass Brazing Inserts

Can be used with Tubing or TEMPCO-PAK

Stainless Steel Spool-Type Brazing Adaptors

· Provides maximum rigidity to Plug or Jack
· For 2-Pin connectors only

Filler Plate Set

· When combined with Dual Tube Adaptor or Dual Cable Clamp, the Filler Plate Set provides the 3/4" pin spacing of a single Duplex Connector
(Part Number: TCA-107-104)-($)

Neoprene Wire Entrance Grommets
Nylon Wire Protection Washers

· For all Miniature Connectors
· Grommet is used in place of cable clamp
· Washer protects fine wire from breakage
Grommet
(Part Number TCA-109-104)-($)
Washer
(Part Number TCA-120-102)-($)

Crimping Inserts

· For all Miniature Connectors
· Used primarily with TEMPCO-PAK

Brazing Inserts

· For all Miniature Connectors
· Can be used with Tubing or TEMPCO-PAK