Jack Panels Selector Switches

How To Order
Standard Accessories	Custom Engineered/Manufactured Accessories
Order by Part number for Accessories. Please contact Tempco for further assistance. Toll Free (888) 268-6396	Understanding that electric heaters can be very application specific for sizes not listed TEMPCO will manufacture an accessory to meet your specifications. Standard lead time is 4 weeks.

Available in 6 to 36 positions

2-Pole and 3-Pole circuits with "OFF"
position

Silver plated blades and contacts with self-cleaning wiper action and low contact resistance

Terminals are silver plated brass with numbered circuits and polarity identification

"OFF" position has terminals available for shorting input circuit when using it with a digital meter (Not available on 3-Pole)

High impact GE noryl™ case

Available in standard and miniature sizes (2-pin only).

Used where individual Jacks are required to fit in standard electrical knockouts.

Standard Jack fits in 3/4" (1-1/8" dia.) electrical knockout.

Miniature Jack fits in 1/2" (7/8" dia.) electrical knockout.

Jacks are ANSI color coded with a maximum service temperature of 400ºF (204ºC).

Both the standard and miniature Jacks install from the front of the panel with no additional hardware required.

Standard Jack

Miniature Jack

Example of Electrical Box Mount

Panel Jacks

Bezel
Mount
Standard
Jack

Miniature Panel Jack -- 2-Pin

Standard
3-Pin
Panel Jack

Miniature Panel Jack
-- 3-Pin

Panel Mount Standard Jab-In Jack

	All Panel Jacks have the same high quality features as their non-panel counterparts and include hardware for mounting.