Home | Back to Temperature Sensing Selector | Back to Hardware and Accessories
Home | Back to
Temperature Sensing Selector | Back
to Hardware and Accessories
 |
TCA-122-101 TCA-122-102 |
|
| For Ceramic Tubes |  |
FTG-148-101 FTG-148-102 |
| Part Number | Description | Price US Dollars |
| TCA-122-101 | 7/8-27 Threaded Ferrule for PPT-101- Porcelain or APT-101- Alumina tube | |
| TCA-122-102 | 7/8-27 Threaded Ferrule for PPT-102- Porcelain or APT-102- Alumina tube | |
| FTG-148-101 | 3/4" NPT x 1/2" NPT Brass reducing hex nipple for PPT-102- or APT-102- tube | |
| FTG-148-102 | 3/4" NPT x 1/2" NPT Steel reducing hex nipple for PPT-102- or APT-102- tube |
 |
FLG-122-101 FLG-122-102 FLG-122-103 |
|
 |
FTG-149-101 FTG-149-102 FTG-149-103 |
|
| For Metal Tubes |  |
FTG-150-101 FTG-150-102 FTG-150-103 |
| Part Number | Description | Price US Dollars |
| FLG-122-101 | 15/16" I.D. x 3-1/2" Cast Iron Flange for 1/2" IPS | |
| FLG-122-102 | 1-1/4" I.D. x 3-9/16" Cast Iron Flange for 3/4" IPS | |
| FLG-122-103 | 1-7/16" I.D. x 3-11/16" Cast Iron Flange for 1" IPS | |
| FTG-149-101 | 1/2" NPT x 1/2" NPT Malleable 90º Elbow | |
| FTG-149-102 | 3/4" NPT x 3/4" NPT Malleable 90º Elbow | |
| FTG-149-103 | 1" NPT x 1" NPT Malleable 90º Elbow | |
| FTG-150-101 | 1/2" NPT x 1/2" NPT Universal Elbow | |
| FTG-150-102 | 3/4" NPT x 3/4" NPT Universal Elbow | |
| FTG-150-103 | 1" NPT x 1" NPT Universal Elbow |
| Mounting fittings are sometimes necessary for the installation of thermocouple and RTD probes. The two basic types of fixed fittings are the Hex Bushing and the Hex Nipple, most commonly made of either Brass or Stainless Steel. | ||
| Hex Bushing |  |
Fixed fittings are brazed to the sheath of the probe; therefore the immersion length "U" must be specified in inches or mm. The immersion length is from the probe tip to the beginning of the thread on the fitting. |
| Sheath Diameter (in) |
Male NPT |
Over-All Length (in) |
Hex Across Flats (in) |
Part Number | Price US Dollars | |
| Brass | Stainless Steel | |||||
| 1/16 | 1/8 | 3/4 | 7/16 | FTG-159-101 | FTG-162-101 | |
| 1/4 | 1 | 9/16 | FTG-159-102 | FTG-162-102 | ||
| 1/2 | 1-1/4 | 7/8 | FTG-159-103 | FTG-162-103 | ||
| 1/8 | 1/8 | 3/4 | 7/16 | FTG-159-104 | FTG-162-104 | |
| 1/4 | 1 | 9/16 | FTG-159-105 | FTG-162-105 | ||
| 1/2 | 1-1/4 | 7/8 | FTG-159-106 | FTG-162-106 | ||
| 3/16 | 1/8 | 3/4 | 7/16 | FTG-159-107 | FTG-162-107 | |
| 1/4 | 1 | 9/16 | FTG-159-108 | FTG-162-108 | ||
| 1/2 | 1-1/4 | 7/8 | FTG-159-109 | FTG-162-109 | ||
| 1/4 | 1/8 | 3/4 | 7/16 | FTG-159-110 | FTG-162-110 | |
| 1/4 | 1 | 9/16 | FTG-159-111 | FTG-162-111 | ||
| 1/2 | 1-1/4 | 7/8 | FTG-159-112 | FTG-162-112 | ||
| 5/16 | 1/4 | 1 | 9/16 | FTG-159-113 | FTG-162-113 | |
| 1/2 | 1-1/4 | 7/8 | FTG-159-114 | FTG-162-114 | ||
| 3/8 | 1/4 | 1 | 9/16 | FTG-159-115 | FTG-162-115 | |
| 1/2 | 1-1/4 | 7/8 | FTG-159-116 | FTG-162-116 | ||
| Hex Nipple |  |
| Sheath Diameter (in) |
Male
NPT |
Over-All Length (in) |
Hex Across Flats (in) |
Part Number | Price
US Dollars |
|
| Brass | Stainless Steel | |||||
| 1/16 | 1/4 | 1-13/32 | 9/16 | FTG-152-101 | FTG-153-101 | |
| 1/2 | 1-27/32 | 7/8 | FTG-152-102 | FTG-153-102 | ||
| 1/8 | 1/4 | 1-13/32 | 9/16 | FTG-152-103 | FTG-153-103 | |
| 1/2 | 1-27/32 | 7/8 | FTG-152-104 | FTG-153-104 | ||
| 3/16 | 1/4 | 1-13/32 | 9/16 | FTG-152-105 | FTG-153-105 | |
| 1/2 | 1-27/32 | 7/8 | FTG-152-106 | FTG-153-106 | ||
| 1/4 | 1/4 | 1-13/32 | 9/16 | FTG-152-107 | FTG-153-107 | |
| 1/2 | 1-27/32 | 7/8 | FTG-152-108 | FTG-153-108 | ||
| 5/16 | 1/4 | 1-13/32 | 9/16 | FTG-152-109 | FTG-153-109 | |
| 1/2 | 1-27/32 | 7/8 | FTG-152-110 | FTG-153-110 | ||
| 3/8 | 1/4 | 1-13/32 | 9/16 | FTG-152-111 | FTG-153-111 | |
| 1/2 | 1-27/32 | 7/8 | FTG-152-112 | FTG-153-112 | ||
| Compression Fittings |  |
There are non-adjustable and adjustable compression fittings. Non-adjustable compression fittings have a metal ferrule which is compressed onto the sheath and deformed permanently in the application; the fitting cannot be relocated along the sheath after tightening. Adjustable compression fittings have a Teflon® ferrule and the fitting can be relocated several times if immersion length is changed. |
| MNPT | Sheath O.D. (in) |
Part Number | Price
US Dollars |
|||
| Non-Adjustable Brass |
Non-Adjustable Stainless Steel |
Adjustable Brass |
Adjustable Stainless Steel |
|||
| 1/16 | 1/16 | FTG-154-101 | FTG-155-101 | FTG-156-101 | FTG-157-101 | |
| 1/8 | FTG-154-102 | FTG-155-102 | FTG-156-102 | FTG-157-102 | ||
| 1/4 | FTG-154-103 | FTG-155-103 | FTG-156-103 | FTG-157-103 | ||
| 1/8 | 1/16 | FTG-154-104 | FTG-155-104 | FTG-156-104 | FTG-157-104 | |
| 1/8 | FTG-154-105 | FTG-155-105 | FTG-156-105 | FTG-157-105 | ||
| 3/16 | FTG-154-106 | FTG-155-106 | FTG-156-106 | FTG-157-106 | ||
| 1/4 | FTG-154-107 | FTG-155-107 | FTG-156-107 | FTG-157-107 | ||
| 5/16 | FTG-154-108 | FTG-155-108 | FTG-156-108 | FTG-157-108 | ||
| 3/8 | FTG-154-109 | FTG-155-109 | FTG-156-109 | FTG-157-109 | ||
| 1/4 | 1/16 | FTG-154-110 | FTG-155-110 | FTG-156-110 | FTG-157-110 | |
| 1/8 | FTG-154-111 | FTG-155-111 | FTG-156-111 | FTG-157-111 | ||
| 3/16 | FTG-154-112 | FTG-155-112 | FTG-156-112 | FTG-157-112 | ||
| 1/4 | FTG-154-113 | FTG-155-113 | FTG-156-113 | FTG-157-113 | ||
| 5/16 | FTG-154-114 | FTG-155-114 | FTG-156-114 | FTG-157-114 | ||
| 3/8 | FTG-154-115 | FTG-155-115 | FTG-156-115 | FTG-157-115 | ||
| 1/2 | 1/8 | FTG-154-116 | FTG-155-116 | FTG-156-116 | FTG-157-116 | |
| 1/4 | FTG-154-117 | FTG-155-117 | FTG-156-117 | FTG-157-117 | ||
| 3/8 | FTG-154-118 | FTG-155-118 | FTG-156-118 | FTG-157-118 | ||
| Spring Loaded Hex Nipple |
 |
Stainless steel 1/2" NPT x 1/2" NPT |
| Sheath Diameter (in) |
Part
Number |
Price
US Dollars |
| 1/8 | FTG-158-101 | |
| 3/16 | FTG-158-102 | |
| 1/4 | FTG-158-103 |