Home | Back to Strip Heaters Selector | Back to Maxistrip Heaters Main Page

Maxistrip Heater Terminations

Screw Terminals

Type S
Terminal Lugs
Terminal lugs with 10-32 binding head screws are the standard termination for all Maxistrip heaters.

 

Type T1
Straight Terminals
Straight outward screw terminals with 8-32 threads.

 

Abrasion Resistant Terminations

Wire braid provides strength and protection to the lead wire insulation, offering sharp bending not possible with armor cable. 20" of wire braid and 24" flexible leads are standard.
Options: Longer leads or braid. Male or female plugs attached to leads.

Type W1
Straight Wire Braid Leads

 

Type W2
Straight Up Wire Braid Leads

 

Type W3    Single Wire Braid Leads
Wire braid provides strength and protection to the lead wire insulation, offering sharp bending not possible with armor cable. 20" of wire braid and 24" flexible leads are standard.
Options: Longer leads or braid. Male or female plugs attached to leads.

 

Type R1__    Single Armor Cable Leads
Armor Cable provides excellent protection against abrasion and contaminants. The cable exits through an adapter that encapsulates the element ends. The adapter and cable are silver soldered on for maximum security and seal protection. 20" of cable and 24" flexible leads are standard.

Type R1A

Galvanized cable

Type R1B

Stainless steel cable
Options: Longer leads or cable. Male or female plugs attached to leads.

 

Type C__    General Purpose Terminal Box
Terminal Boxes provide a simple and economical way to eliminate all live exposed terminals and electrical wiring that can be a potential hazard to employees or machines. Boxes have 5/8" knockouts for standard connections to simplify installation. Strip heaters fitted with boxes can be supplied, factory prewired with leads, armor cable or braid.

Type CA

Box only

Type CC

Box with SS cable

Type CB

Box with galvanized cable

Type CD

Box with wire braid

 

Type P2__    Quick Disconnect High Temperature Plug
Quick Disconnect Plug assemblies are highly recommended and should be used whenever possible. They provide the simplest and safest way to apply power to strip heater installations. The combination of plug and cup assembly, along with armor cable cover leads, eliminates all live exposed terminals and electrical wiring that can be a potential hazard to employees and machines. To simplify installation, maxistrips fitted with P2 plug assemblies can be supplied prewired, using high temperature lead wire protected with armor cable or wire braid. Type P not available on 1-1/2" wide Maxistrip.

Type P2A

Box and cup only

Type P2D

w/straight plug and SS cable

Type P2C

w/straight plug and galvanized cable

Type P2E

w/straight plug and wire braid