Type S3 - Strain Relief Straight Leads

Strain relief clip for leads subject to tension and stress. A "T" type strain relief is silver brazed to the sheath.

Standard - 10" leads. If longer leads are required - Specify.

Type S4 - Strain Relief Right Angle Leads

Strain relief clip for leads subject to tension and stress. A "T" type strain relief is silver brazed to the sheath and bent at a 90 degree angle.

Standard - 10" leads. If longer leads are required - Specify.
Type W - Straight Wire Braided Leads
Stainless steel braid over fiberglass leads offer sharp bending not possible with armor cable, as well as abrasion protection. Temperature at the lead end is not to exceed 482 degrees F (250 degrees C).

Standard - 10" braid over 12" leads. If longer braid or leads are required - Specify.

Amperage Limitation for Type W
Diameter 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"
Maximum Amperage 2.5 2.5 4.0 7.0 10.0 10.0
Diameter Fig. A Dim
in. mm in. mm
1/4 6.35 A 5/16 7.94
5/16 7.94 A 3/8 9.53
3/8 9.53 B 3/8 9.53
1/2 12.70 B 7/16 11.11
5/8 15.88 B 9/16 14.29
3/4 19.05 B 9/16 14.29


Type CS - Cable Silver Brazed to Sheath

Armor cable provides the maximum in protection for abrasive, jagged environments. The armor cable is silver brazed directly to the cartridge heater, eliminating the coupling to maintain an overall diameter equal to or smaller than the cartridge diameter.

CSA - Galvanized armor cable
CSB - Stainless steel armor cable

Standard - 10" cable over 12" leads. If longer cable or leads are required - Specify
MISSING SCAN Type C1 - Straight Armor Cable
Armor cable provides the maximum in protection for abrasive, jagged environments. The coupling between the cartridge and the armor cable is mechanically fastened or silver brazed.

C1A - Galvanized armor cable, mechanically fastened
C1B - Stainless steel armor cable, mechanically fastened
C1C - Galvanized armor cable, silver brazed
C1D - Stainless steel armor cable, silver brazed

Standard - 10" armor cable over 12" leads. If longer cable or leads are required - Specify
Diameter A Dim B Dim Cable
in. mm in. mm in. mm Dia.
1/4 6.35 11/16 17.46 5/16 7.94 1/4
5/16 7.94 11/16 17.46 7/16 11.11 1/4
3/8 9.53 11/16 17.46 7/16 11.11 3/8
1/2 12.70 13/16 20.64 9/16 14.29 1/2
5/8 15.88 1 25.40 3/4 19.05 1/2
3/4 19.05 11/4 31.75 7/8 22.23 1/2