Type C2 - Right Angle Armor Cable With Copper Elbow Armor cable provides the maximum in protection for abrasive, jagged environments. The copper elbow between the cartridge and the armor cable is mechanically fastened or silver brazed. C2A- Galvanized armor cable, mechanically fastened C2B - Stainless steel armor cable, mechanically fastened C2C - Galvanized armor cable, silver brazed C2D - Stainless steel armor cable, silver brazed Standard - 10" armor cable over 12" leads . If longer cable or leads are required - Specify.
	Type R1 - Right Angle Leads With Copper Elbow This termination is not suitable for abrasive environments. The copper elbow is mechanically fastened or silver brazed to the Cartridge Heater. R1A - Mechanically fastened R1B - Silver brazed Standard - 10" leads. If longer leads are required - Specify.
Dimensions for Types C2 and R1 Diameter A Dim B Dim Cable in. mm in. mm in. mm Dia. 1/4 6.35 3/4 19.05 3/4 19.05 1/4 5/16 7.94 15/16 23.81 15/16 23.81 1/4 3/8 9.53 15/16 23.81 15/16 23.81 3/8 1/2 12.70 11/4 31.75 11/4 31.75 1/2 5/8 15.88 11/4 31.75 11/4 31.75 1/2 3/4 19.05 13/4 44.45 11/4 31.75 1/2	Dimensions for Types C3 , W1, and R2 Diameter A Dim Armor Cable in. mm in. mm in. mm 1/4 6.35 5/16 7.94 1/4 6.35 5/16 7.94 5/16 7.94 1/4 6.35 3/8 9.53 7/16 11.11 3/8 9.53 1/2 12.70 9/16 14.29 1/2 12.70 5/8 15.88 9/16 14.29 1/2 12.70 3/4 19.05 9/16 14.29 1/2 12.70
	Type C3 - Right Angle Armor Cable Use this termination when space is limited and maximum protection is required. The armor cable is silver brazed to the cartridge sheath at 90 degrees. The sheath extension is potted with cement. Various lead end finishes are available as listed below. C3A - Cement potting and silicone varnish, with galvanized cable C3B - Cement potting and silicone varnish, with stainless steel cable C3C - Heli-arc welded lead end disc, with galvanized cable C3D - Heli-arc welded lead end disc, with stainless steel cable Standard - 10" armor over 12" leads. If longer cable or leads are required - Specify.
	Type W1 - Right Angle Wire Braided Leads Use this termination when space is limited and maximum protection is required. Stainless steel braid over fiberglass leads for abrasion protection, mechanically crimped to the cartridge sheath at 90 degrees. Wire braid offers extreme flexibility not possible with armor cable. Various lead end finishes are available as listed below. W1A - Cement potting and silicone varnish W1B - Heli-arc welded lead end disc Standard - 10" braid over 12" leads. If longer braid or leads are required - Specify.