Type LR - Locating Ring A locating ring can be attached to the heater to aid in positioning the heater in the application. Ring is 1/4" from the lead end. Standard - 10" externally connected leads. If longer leads are required - Specify.
	Type PS - Pull Strap A stainless steel wire rope is silver brazed to the lead end of the cartridge heater sheath to assist in removing the heater. Standard - 10" externally connected leads. If longer leads are required - Specify.
TERMINAL BOXES
	Type E1 - General Purpose Outlet Box General purpose NEMA 1 electrical enclosure designed to provide protection from contaminant's and electric shock. The boxes have 5/8" conduit knockouts and are silver brazed to the cartridge sheath. E1A - Outlet box with fiberglass leads E1B - Outlet box with galvanized armor cable and fiberglass leads E1C - Outlet box with S.S. armor cable and fiberglass leads E1D - Outlet box with S.S. wire braid and fiberglass leads E1E - Outlet box with screw terminals Standard - 10" externally connected leads. If longer leads are required - Specify. If cable or braid is required - Specify Type and Length.
	Type E3 - Explosion Resistant Outlet Box General purpose NEMA 7 electrical enclosure designed to provide protection from contaminant's, moisture, electric shock, and hazardous conditions. The box is silver brazed to the cartridge sheath. The explosion resistant housing has a 1/2"-14 NPT outlet hub. E3A - Outlet box, w/10" fiberglass leads E3B - Outlet box with screw terminals Standard - 10" leads. If longer leads are required - Specify.
HEAT RESISTANT TERMINATION
	Type B - Ceramic Bead Insulation The ultimate in high temperature lead protection. Allows for the attachment of flexible leads to the heater away from the high heat area. Temperature range: up to 1200 degrees F (650 degrees C) Standard - 10" inch solid nickel pins insulated with ball and socket construction type ceramic beads. If longer pins are required - Specify. If Flexible Leads are required - Specify Length.