1/4" Diameter (actual .246") High Density Cartridge Heaters

Part Numbers and prices listed below are for Cartridge Heaters terminated with Type "N" Leads 10" long. Other Variations available.

Consult Tempco for volume discounts. "Qty" indicates quantity in stock as of 09.05.08

Sheath Length Watts Watt Density Part Number Price
in. (mm) w/in2 (w/cm2) 120V Qty. 240V Qty
1 25.4 50 127 20 HDC00001 4 - 0 $27.95
1 25.4 80 204 32 HDC00002 20 - 0 $27.95
1 25.4 100 255 40 HDC00003 11 HDC00004 10 $27.95
1 25.4 150 382 59 HDC00005 9 - 0 $27.95
1 1/8 28.6 100 204 32 HDC00006 53 - 0 $28.55
1 1/4 31.8 50 85 13 HDC00007 8 - 0 $28.55
1 1/4 31.8 75 127 20 HDC00008 22 - 0 $28.55
1 1/4 31.8 100 170 26 HDC00009 9 - 0 $28.55
1 1/4 31.8 125 212 33 HDC00010 14 - 0 $28.55
1 1/4 31.8 150 255 40 HDC00011 7 HDC00012 24 $28.55
1 1/4 31.8 200 340 53 - 0 HDC00013 8 0
1 1/4 31.8 225 382 59 - 0 HDC00014 17 0
1 1/2 38.1 50 64 10 HDC00015 32 - 0 $28.80
1 1/2 38.1 100 127 20 HDC00016 6 HDC00017 6 $28.80
1 1/2 38.1 150 191 30 HDC00018 15 HDC00019 7 $28.80
1 1/2 38.1 175 223 35 HDC00020 25 HDC00021 9 $28.80
1 1/2 38.1 200 255 40 HDC00022 38 HDC00023 32 $28.80
1 1/2 38.1 250 318 49 - 0 HDC00024 10 0
1 3/4 44.5 75 76 12 HDC00025 19 - 0 $29.10
1 3/4 44.5 150 153 24 HDC00026 13 - 0 $29.10
1 3/4 44.5 300 306 47 - 0 HDC00027 19 0
2 50.8 50 42 7 HDC00028 20 - 0 $29.10
2 50.8 80 68 11 HDC00029 26 - 0 $29.10
2 50.8 100 85 13 HDC00030 12 HDC00031 12 $29.10
2 50.8 125 106 17 HDC00032 11 HDC00033 10 $29.10
2 50.8 150 127 20 HDC00034 15 HDC00035 30 $29.10
2 50.8 200 170 26 HDC00036 15 HDC00037 20 $29.10
2 50.8 250 212 33 HDC00038 10 HDC00039 12 $29.10
2 50.8 300 255 40 - 0 HDC00040 13 0
2 1/4 57.2 200 146 23 - 0 HDC00041 24 0
2 1/2 63.5 150 95 15 - 0 HDC00042 1 0
2 1/2 63.5 200 127 20 HDC00043 11 HDC00044 11 $30.85
2 1/2 63.5 250 159 25 HDC00045 8 HDC00046 6 $30.85
2 1/2 63.5 350 223 35 - 0 HDC00047 16 0
2 3/4 69.9 200 113 18 - 0 HDC00048 8 0
3 76.2 75 38 6 HDC00049 17 - 0 $32.45
3 76.2 100 51 8 HDC00050 29 HDC00051 7 $32.45
3 76.2 125 64 10 - 0 HDC00052 13 0
3 76.2 150 76 12 HDC00053 10 HDC00054 7 $32.45
3 76.2 200 102 16 HDC00055 20 HDC00056 9 $32.45
3 76.2 250 127 20 HDC00057 29 HDC00058 2 $32.45
3 76.2 300 153 24 HDC00059 13 HDC00060 17 $32.45
3 76.2 350 178 28 - 0 HDC00061 10 0
3 1/2 88.9 200 85 13 - 0 HDC00062 14 0
3 1/2 88.9 300 127 20 HDC00063 20 HDC00064 66 $33.75
3 3/4 95.3 300 118 18 - 0 HDC00065 7 0
4 101.6 100 36 6 HDC00066 12 - 0 $37.05
4 101.6 150 55 9 HDC00067 33 - 0 $37.05
4 101.6 175 64 10 HDC00068 17 HDC00069 12 $37.05
4 101.6 200 73 11 HDC00070 10 HDC00071 10 $37.05
4 101.6 250 91 14 HDC00072 22 HDC00073 14 $37.05
4 101.6 300 109 17 HDC00074 7 HDC00075 24 $37.05
4 101.6 400 146 23 - 0 HDC00076 12 0
4 1/2 114.3 125 40 6 HDC00077 20 - 0 $39.10
4 1/2 114.3 200 64 10 HDC00078 34 - 0 $39.10
4 1/2 114.3 500 159 25 - 0 HDC00079 20 0
5 127 200 57 9 - 0 HDC00080 8 0
5 127 250 71 11 - 0 HDC00081 28 0
5 127 350 99 15 HDC00082 12 HDC00083 11 $41.35
5 127 400 113 18 HDC00084 21 HDC00085 7 $41.35
5 3/4 146.1 350 85 13 HDC00086 78 HDC00087 132 $45.55
6 152.4 150 35 5 HDC00088 5 - 0 $45.55
6 152.4 200 46 7 - 0 HDC00089 23 0
6 152.4 300 69 11 HDC00090 4 HDC00091 28 $45.55
6 152.4 400 93 14 HDC00092 12 HDC00093 14 $45.55
6 152.4 450 104 16 HDC00094 36 HDC00095 23 $45.55
6 152.4 600 139 22 - 0 HDC00096 5 0
6 1/2 165.1 500 106 17 HDC00097 20 HDC00098 42 $47.60
7 177.8 600 118 18 - 0 HDC00099 12 0
7 1/2 190.5 525 95 15 HDC00100 22 - 0 $53.20
8 203.2 300 51 8 HDC00101 26 - 0 $55.20
8 203.2 600 102 16 - 0 HDC00102 10 0
9 228.6 675 101 16 - 0 HDC00103 11 0
9 1/2 241.3 525 74 12 HDC00104 29 - 0 $61.55
10 254 750 101 16 - 0 HDC00105 2 0
11 279.4 600 73 11 - 0 HDC00106 12 0
13 330.2 725 74 12 - 0 HDC00107 6 0


Amperage Limitations
Diameter 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"
Max Amperage
See Next Line for Exceptions 		4.4 4.5 6.7 10.5 23.0 23.0
Maximum Amperage for
Types F and W Terminations 		2.5 2.5 4.0 7.0 10.0 10.0



SHEATH LENGTH
Sheath length is the actual insertion length of the heater, not the overall length of the heater. Sheath length tolerance: + or - 3/32 OR + or - 2%, whichever is greater, except for Type F and W terminations. Sheath length tolerance for Type F and W terminations: + or - 3/16 OR + or - 2%, whichever is greater.