TempcoHead1A.gif (3001 bytes)
Home | Back to Process Heater Selector

Drum Heaters
(Metal and Silicone Rubber Jacketed)

Metal Jacketed

  • Rapid heat-up of drum 
  • Easy installation and removal 
  • Durable metal design 
  • Infinite switch or thermostat 
  • 3-heat control
  • 6 ft. power cord
  • Variety of sizes and ratings
  • Stock to 1 week lead time

Metal Jacketed Drum Heater Standard sizes and Ratings
Part Numbers with an asterisk (*) are in stock for immediate shipment)

Drum Size Temperature Control Watts Volts Part Number
55 GAL.
22.5"
Diameter
Infinite/Variable Heat Control
60°-250° Thermostat
200°-400° Thermostat
1750 120 *DHM00010
1920 *DHM00020

1920

DHM00030
Infinite/Variable Heat Control
60°-250° Thermostat
200°-400° Thermostat
3000 240 *DHM00040
*DHM00050
DHM00060
Optional Drip Guard DHM00070
30 GAL.
18.5"
Diameter
Infinite/Variable Heat Control
60°-250° Thermostat
200°-400° Thermostat
1750 120 DHM00080
1920 DHM00090
1920 DHM00100
16 GAL.
14.5"
Diameter
Infinite/Variable Heat Control
60°-250° Thermostat
200°-400° Thermostat
1500 120 DHM00110
DHM00120
DHM00130
5 GAL.
11.25"
Diameter
Infinite/Variable Heat Control
60°-250° Thermostat
200°-400°Thermostat
1500 120 DHM00140
DHM00150
DHM00160

 

The 1920 Watt/120V model is equipped with a special high amperage plug. If required the matching receptacle is: EHD-103-108 Hubbel #5361 20A 125V 

The 3000 Watt/240V is equipped with a standard 15A/240V straight blade type plug.

Thermostat Control models sense temperature in an area remote from the heating element and will automatically cycle heater to maintain set temperature. Three-heat switch allows three wattage ratings per thermostat setting and voltage rating.

Infinite/Variable Control models cycle the current ON and OFF. The ratio of ON time will increase as the the control is advanced. Three-heat switch allows the operator to control the heater output within a given 3 settings of high, medium, or low.

 

 

Silicone Rubber Jacketed

The heater is built to be tough, long lasting, and resistant to chemicals. Because few materials stick to its silicone rubber with fiberglass reinforced construction, it is easy to clean.  When not in use, it folds for convenient storage.

The total wattage (number of heaters) and the material being heated inside of the drum must be considered when determining the actual temperature to which that specific material can be heated. 

Specifications

  • Maximum operating temperature of 400°F (205°C).
  • Power cord is 6-foot long, SJO Type 16/3 complete with three-prong plug for 115 VAC models. Plug not included on 230 VAC models.
  • Heating element made of Nichrome resistance wire.
  • Surface grounded electrically with internal metal screen.
  • 1250 volts dielectric tested.
  • Vulcanized silicone rubber construction resistant to moisture, ozone, fungus, and radiation.
  • All heaters have a standard width of 3 inches except 1500W 55 gallon, which are 4 inches

Silicone Rubber Drum Heater Standard sizes and Ratings
Part Numbers with an asterisk (*) are in stock for immediate shipment)

Drum Size Watts Volts Length Thermostat Part Number
22-1/2" dia. ±1"
55 Gallon
1000 120 64" no *DHR00010
1000 120 64" yes *DHR00020
1000 240 64" no *DHR00030
1000 240 64" yes *DHR00040
1500 120 64" yes DHR00050
1500 240 64" yes DHR00055
30 Gallon
18" dia. ±1"
 750 120 54" no DHR00060
 750 120 54" yes DHR00070
 750 240 54" no DHR00080
 750 240 54" yes DHR00090
15 Gallon
13-1/2" dia. ±1"
 500 120 40" no DHR00100
 500 120 40" yes DHR00110
 500 240 40" no DHR00120
 500 240 40" yes DHR00130
5 Gallon
11-1/2" dia. ±1"
 300 120 31" no DHR00140
 300 120 31" yes DHR00150