Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C). Check recommendation guide and with chemical supplier for proper sheath material selection.
Replaces more expensive alumina or graphite heaters.

Design Features

• 10 watts/in2 (1.6 watts/cm2) for long service life.

• Non-contaminating Teflon® covered stainless steel elements.

• T1 thermal fuse protection standard. T2 bi-metal switch optional.

• Grounded internal metal element for safety.

• UL listed CSA certified.

• Lightweight non-floating construction.

• Vapor-tight polypropylene terminal enclosure with universal mounting flange.

• Standard 3 ft. flexible PVC liquid-tight conduit.

• Polypropylene guards (optional Teflon® guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.)

• Standard three-phase wiring.

• 240 480 volts standard as listed—other voltages available.

• Longer lengths available. Consult Tempco.