Self Contained

Home | Back to Process Heater Selector | Back to Screw Plug Selector

Self Contained Immersion Heaters
	This heater is specifically designed for commercial dishwashers and sterilizing equipment but is readily adaptable for use in other water heating applications. The heating elements are prewired to a definite purpose contactor thermostat and high limit cutout. The thermowell is located at the top of the element bundle for fast shut-off response preventing overheating due to low water level conditions.
2" NPT Brass screw plug Three Incoloy® 800 tubular elements Thermostat— 60°F (15°C) to 250°F (120°C) range Over-temperature cutout with manual reset	Internal Definite Purpose contactor with 120V holding coil NEMA 4 housing (Moisture resistant) Optional clamping nut flat washer and gasket for mounting in thin wall tanks with a 2 3/8" (60 mm) diameter opening

Standard Sizes and Ratings

Immersed Length		KW	Part Number					Approximate Net Weight		Price US Dollars
in	mm	KW	208-1Ph	208-3Ph	240V-1Ph	240V-3Ph	480V-3Ph	lbs	kgs	Price US Dollars
13 1/8	333	5	TSP01550	TSP01551	TSP01552	TSP01553	TSP01554	3	1	—
18 3/4	476	7.5	TSP01555	TSP01556	TSP01557	TSP01558	TSP01559	3	1	—
23 7/8	606	10	TSP01560	TSP01561	TSP01562	TSP01563	TSP01564	4	2	—
30 1/4	768	12	—	TSP01566	—	TSP01568	TSP01569	5	2	—
32 1/2	826	15	—	TSP01570	—	TSP01571	TSP01572	6	3	—
35 3/4	908	16	—	TSP01573	—	TSP01574	TSP01575	7	3	—
45 3/4	1162	20	—	—	—	TSP01576	TSP01577	9	4	—

Consult Tempco for quantity discounts.

How To Order

Standard Heaters

Custom Engineered/Manufactured Heaters

Order by Part Number for standard sizes listed in the table above.

Understanding that an electric heater can be very application specific for sizes not listed TEMPCO will design and manufacture a Self Contained Immersion Heater to meet your requirements. Standard lead time is 4 weeks.

Please contact Tempco for further assistance.

Toll Free (888) 268-6396

Credit.gif (10916 bytes)