| Type
MC-Mounting
Collar 
Plated steel mounting collars
are locked in place with a set-screw and serve as an adjustable stop for
through the wall mounting. Collars are shipped in bulk unless otherwise
specified.
Element
Diameter |
"A" |
"B" |
| in |
mm |
in |
mm |
in |
mm |
| 0.26 |
6.6 |
5/16 |
7.1 |
5/8 |
15.9 |
| 0.315 |
8.0 |
3/8 |
8.7 |
3/4 |
19 |
| 0.375 |
9.5 |
7/16 |
11.1 |
7/8 |
22.2
|
| 0.43 |
10.9 |
7/16 |
11.1 |
7/8 |
22.2 |
| 0.475 |
12 |
7/16 |
11.1 |
1 |
25.4 |
|
Type
LR—Locator
Ring 
Locator rings are permanently attached to the heater
sheath and are used to limit the movement of the heater while allowing for
expansion and contraction of the heater sheath. When ordering specify
location from end of sheath. |
| Type
MF
—Mounting Bracket
The 16 gauge Stainless Steel Mounting bracket is an economical way to mount the heater in non-pressurized, non liquid applications. Unless otherwise specified the bracket will be located 1/2" (13 mm) from the edge of the heater sheath.
Custom brackets of any size, thickness and material can also be supplied to meet your requirements.
|
Type
B
—Watertight Bulkhead Fittings
Bulkhead
fittings provide a leak-proof method for mounting tubular heating elements
through tank walls. A gasket, plated steel washer and brass hex jam nuts
are included. Specify if a stainless steel washer and jam nut are required
when ordering stainless steel fittings.
Standard mounting location is the threaded end of the bulkhead flush with
the end of the element sheath. For other mounting locations specify
distance from end of sheath to gasket surface on bulkhead.
Fittings are silver brazed or TIG welded to the element, depending on
fitting material and customer application.
Fittings in table are the most commonly used. Special fittings can be
manufactured to meet your requirements.
Specify: material, flange type, thread type and length.
Tubular
Diameter |
Fitting
Material |
Flange
Type |
"A" |
"B" |
"C" |
Thread
Size
(UNF) |
| in |
mm |
in
|
mm |
in |
mm |
in |
mm |
| 0.26 |
6.6 |
Brass |
Round |
3/4 |
19 |
1/2 |
12.7 |
5/8 |
16 |
1/2-20 |
| 0.26 |
6.6 |
Stn. Stl. |
Round |
3/4 |
19 |
1/2 |
12.7 |
5/8 |
16 |
1/2-20 |
| 0.315 |
8.0 |
Brass |
Round |
3/4 |
19 |
1/2 |
12.7 |
5/8 |
16 |
1/2-20 |
| 0.315 |
8.0 |
Stn. Stl. |
Round |
3/4 |
19 |
1/2 |
12.7 |
5/8 |
16 |
1/2-20 |
| 0.375 |
9.5 |
Brass |
Round |
3/4 |
19 |
1/2 |
12.7 |
5/8 |
16
|
1/2-20 |
| 0.375 |
9.5 |
Stn. Stl. |
Round |
3/4 |
19 |
1/2 |
12.7 |
5/8 |
16 |
1¼2-20 |
| 0.43 |
10.9 |
Brass |
Round or Hex |
7/8 |
22 |
3/4 |
19 |
7/8 |
22 |
5/8-18 |
| 0.43 |
10.9 |
Stn. Stl. |
Round or Hex |
7/8 |
22 |
3/4 |
19 |
7/8 |
22 |
5/8-18 |
| 0.43 |
10.9 |
Steel |
Round |
7/8 |
22 |
3/4 |
19 |
7/8 |
22 |
5/8-18 |
| 0.475 |
12.1 |
Brass |
Round |
7/8 |
22 |
3/4 |
19 |
7/8 |
22 |
5/8-18 |
| 0.475 |
12.1 |
Stn. Stl. |
Round |
7/8 |
22 |
3/4 |
19 |
7/8 |
22 |
5/8-18 |
| 0.475 |
12.1 |
Steel |
Round |
7/8 |
22 |
3/4 |
19 |
7/8 |
22 |
5/8-18 |
| 0.475 |
12.1 |
Brass |
Round |
1 |
25 |
3/4 |
19 |
7/8 |
22 |
3/4-16 |
| 0.475 |
12.1 |
Stn. Stl. |
Round |
1 |
25 |
3/4 |
19 |
7/8 |
22 |
3/4-16 |
| 0.625 |
15.9 |
Stn. Stl. |
Round |
1-1/8 |
32 |
3/4 |
19 |
1 |
25 |
7/8-14 |
|
