Custom products are Tempco's specialty. Browse our portfolio below for inspiration.
Heater for high temperature application where the electrical housing is separated from the heater flange to lower the ambient temperature of the electrical wiring
Heater with completely sealed, insulated housing for a medical product manufacturing application; prevents contamination from entering the air stream
Heater and blower assembly ready for connection to duct work for drying metal parts after being coated with a rust inhibitor; 48KW, 480 V unit produces 15 CFM heated air
Application specific with foldback bends
Heater with NEMA housing; NEMA 4 (moisture resistant), NEMA 7 (explosion resistant) and NEMA 12 (dust resistant) are all available
90KW skid mounted fuel circulation system for heating in waste reduction management
Custom flange heater for Sanitary Process Solutions
Metal tube over-the-side chemical bath heater
A basin sump-pump heater with float switch, for use on construction excavation sites
Large Diameter Flanged Air Heater
Flanged Immersion Heaters used to heat tanks as part of the micro brewing process.
Silicone Rubber Drum Heaters come in a variety of sizes. Tempco also manufactures 5, 15 and 30 gallon drum heaters.
607 North Central Avenue
Wood Dale, IL 60191-1452 USA
Phone: 630.350.2252 Toll Free: 888.268.6396
Fax: 630.350.0232 Email: firstname.lastname@example.org
TEMPCO BRANCH OFFICES
We have Branch Offices located across the United States.
Authorized SA3 Distributor Log-In
ISO 9001:2015 Certified Company