Additional Design Features
- Available with or without an Integrated Thermostat (See EHA below for Remote Thermostats)
- Custom Design and Alternate Thermostat Settings Available
- Heater Vulcanized to an Aluminum Mounting Plate for Easy Installation
- 120V Standard; Custom Voltages Available upon Request
- 48" Teflon® Leads Standard
- Dimensions Listed are for Heater and Bracket; Actual Heater Width is 1/2" Less
- Safe to Operate, No Exposed Electrical Connections
It is recommended that the enclosure heater be used with a thermostat either built in or mounted remotely to limit the maximum temperature reached and conserve energy. The suggested mounting method is at the bottom of the enclosure, mounted vertically. If a remote mounted thermostat is preferred, mount the heater on the bottom of the enclosure and the thermostat in the middle of the enclosure.
Remote Thermostats for Enclosure Heaters
- Pressure Sensitive Adhesive for easy mounting
- Standard 16ga Teflon® lead length: 48"
- Can easily be located anywhere in the enclosure using the pressure sensitive adhesive.
- Any standard thermostat can be used (see thermostats for available ranges)
- Silicone rubber base and enclosure
- Ratings: 10A/250 Vac, 15A/120 Vac
- Part Number: EHA00005 (pictured below) – D-ring and strap mounting thermostat. Can be applied to sense the air around an object or an object directly.