Tempco Custom Heater Manufacturing

Click image to enlarge

  • WebSmllrSiliRbbrPipe.jpg
  • WebLrgrSiliRbbrPipe.jpg

PVC Pipe Bending Heaters

This heavy-duty assembly, made from our proven wire-wound silicone rubber heater technology, will provide hundreds of hours of use.

Design Features
  • Built-in thermostat limits temperature to 194°F (90°C)
  • Standard Voltage is 120 Vac
  • 6-ft. plug and cordset standard
Stock PVC Pipe Bending Heaters
Pipe Diameter Length Watts Volts Warm-Up Time Part Number
1/2" to 1-1/2" 12" 180 120 4-10 minutes SHS01210
2" to 4" 20" 950 120 7-18 minutes SHS01222

 

Explore PVC Pipe Bending Heaters Specifications


Tempco’s PVC Pipe/Conduit Bending Heater Assembly 

These assemblies make it easy to form PVC plastic pipe and conduit at the job site.

Instructions:

  • wrap the heater assembly around the pipe at the location desired
  • plug in assembly
  • depending on pipe size, leave heater wrapped around the pipe for 4 to 18 minutes
  • when soft enough, bend pipe by hand to the desired radius or shape

This page and any filter selections have been saved.

Review Your Items.
 

Request for Quote

Tempco logo
  CORPORATE HEADQUARTERS
Tempco Electric Heater Corporation

607 N. Central Ave. | Wood Dale, IL 60191-1452 USA
Phone: 630.350.2252 | Toll Free: 888.268.6396
Fax: 630.350.0232 | Email: [email protected]

TEMPCO BRANCH OFFICES
We have Branch Offices located across the United States.

 


 

Tempco on LinkedIn       Tempco on Facebook       Tempco on Instagram       Tempco on Twitter       Tempco on YouTube

© 2022-2023 Tempco Electric Heater Corporation. All Rights Reserved.
top