Plug and Jack Accessory Details

Cable Clamp

For 3/8" Diameter sheath or 1/4" armor cable
*Part Number: TCA-107-102

*Part Discontinued.
Please use TCA-107-106 pictured to the right.

Clamp and Grommet

For Standard Size Plugs and Jacks, can be used with Lead Wire or Armor Cable
Cable Clamp Part Number: TCA-107-106
Neoprene Grommet Part Number: TCA-109-102

Dual Cable Clamps

• Assemble Standard Connectors into Dual Connectors
• Accommodate either One or Two Lead-In Cables
• Use 2-Pin Connectors only

Part Number: TCA-107-103

Cable Clamps and Grommets for Miniature Plugs and Jacks

Cable Clamp (For 2-Pin Miniature)
Part Number: TCA-107-105

Cable Clamp (For 3-Pin Miniature)
Part Number: TCA-107-109

Neoprene Grommet
Part Number: TCA-109-102

Neoprene Wire Entrance Grommets
Nylon Wire Protection Washers

• For all Miniature Connectors
• Grommet is used in place of cable clamp
• Washer protects fine wire from breakage Grommet

Part Number: TCA-109-104
Washer Part Number: TCA-120-102

Brass Crimping Inserts

Used primarily with TEMPCO-PAK

Standard Tube Adapters
Affords higher degree of stability to Plug or Jack

Insert Tube Adapter

Secured by slots in body of the Plug or Jack (2-Pin or 3-Pin)

Stainless Steel Spool-Type Brazing Adapters

• Provides maximum rigidity to Plug or Jack
• For 2-Pin connectors only

Dual Tube Adapters

• Assemble Standard Connectors into Dual Connectors
• For adjacent TEMPCO-PAK
• Has Brass Ferrule
• Use 2-Pin Connectors only

Mini Insert Tube Adapter

• Secured by slots in body of the Plug or Jack (2-pin or 3-Pin)
• Compression Fitting has Brass Ferrules
• Can be used with TEMPCO-PAK or Tubing
• For all Miniature Connectors only

Thermocouple Bracket

• Used to mount T/C Probes on Panel or Oven Walls
• Supplied with two #6 Self-Tapping Screws

Part Number: SMPR-1062

Filler Plate Set

• When combined with Dual Tube Adapter or Dual Cable Clamp, the Filler Plate Set provides the 3/4" pin spacing of a single Duplex Connector.

Part Number: TCA-107-104