Custom products are Tempco's specialty. Browse our portfolio below for inspiration.
Type R: Uninsulated heater with perforated SS outer shell for more efficient cooling
Long conical two-piece heater
Heater with insulating shroud to minimize energy losses
Heater with large cutout at gap and clearance holes
Maxiband heater for rectangular extruder application
Dual circuit unit has two heaters in one envelope
Nozzle heater for magnesium machine
Fully flexible tapered two-piece heater
Type RC: Reverse Construction Maxiband heater to heat a cylindrical surface from the inside out
Arch shaped heater for a special die - a two-piece heater will cover an obround die
Partial coverage with spring-loaded clamping and wire braid leads
Fully flexible one-piece heater with varying width
Two independent electrical circuits in a single heater with dual wattage and dual voltage option and thermocouple clearance hole
Boat-shaped two-piece heater
Two-piece heater with spring-loaded clamping and single leads for easy wiring
Two-piece rectangular heater with corner radius and cutouts
Heater with separate strap designed for three-phase operation, with ground terminal and thermocouple clearance hole
Heater with miniature outlet box and clearance hole
Four-piece heater with spring-loaded clamping and independent electrical circuits on each segment
Three mica strip heaters connected together to form a triangular heater
Made with staggered/offset insulators for easier installation
Mica insulated band heater designed for a square or rectangular barrel
607 North Central Avenue Wood Dale, IL 60191-1452 USA Phone: 630.350.2252 Toll Free: 888.268.6396 Fax: 630.350.0232 Email: [email protected]
TEMPCO BRANCH OFFICES We have Branch Offices located across the United States.
DISTRIBUTOR LOG-IN Authorized SA3 Distributor Log-In
ISO 9001:2015 Certified Company
Phone: 52.55.2451.4070 Fax: 52.55.5561.6889 Email: [email protected] Website: www.tempcomexico.com