Tempco Custom Heater Manufacturing

Click image to enlarge

  • 13 oz. Spray Can
  • 4 oz. Paste

BNS Anti-Seize Cartridge Heater Coating

This high temperature, electrically insulating and thermally conductive coating will minimize oxidation and improve heat transfer from heater to the object being heated and is formulated to assist in the removal of cartridge heaters.

  • Two forms:
    • 13 oz. Aerosol spray
    • 4 oz. Paste with brush applicator top
  • Temperature Range: 1562°F (850°C)
  • High Heat Transfer

Explore BNS Anti-Seize Cartridge Heater Coating Specifications

Directions: Brush a thin layer of paste over cartridge heater or spray cartridge heater lightly prior to inserting heater into hole/application.

CAUTION: Do NOT apply over lead wires or other bare current carrying conductors, since the water in the paste and spray can cause an electrical short circuit.

NOTE: Formulated to assist in the removal of Cartridge Heaters.

This page and any filter selections have been saved.

Review Your Items.

Request for Quote

Tempco logo
Tempco Electric Heater Corporation

607 N. Central Ave. | Wood Dale, IL 60191-1452 USA
Phone: 630.350.2252 | Toll Free: 888.268.6396
Fax: 630.350.0232 | Email: [email protected]

We have Branch Offices located across the United States.



Tempco on LinkedIn       Tempco on Facebook       Tempco on Instagram       Tempco on Twitter       Tempco on YouTube

© 2023-2024 Tempco Electric Heater Corporation. All Rights Reserved.